how to make burlap flower door hanger?

To make a burlap flower door hanger, you will need burlap fabric, a wire wreath frame, floral wire, scissors, and a hot glue gun. Cut the burlap into strips and tie them onto the wire wreath frame, making sure to fluff and shape the burlap as you go. Next, create burlap flowers by cutting circles out of the burlap and folding them into quarters. Secure the folds with floral wire and fluff the petals. Attach the burlap flowers to the wreath frame with hot glue. Finally, add any additional embellishments, such as ribbon or greenery, and hang the door hanger on your front door.

1、 Materials needed for burlap flower door hanger

How to make burlap flower door hanger:

Step 1: Cut a piece of burlap into a rectangle shape, approximately 12 inches by 18 inches.

Step 2: Fold the burlap in half lengthwise and then fold it in half again widthwise.

Step 3: Cut the burlap along the folded edges to create four equal-sized squares.

Step 4: Take one of the burlap squares and fold it in half diagonally to create a triangle shape.

Step 5: Fold the bottom corner of the triangle up to the top corner to create a smaller triangle.

Step 6: Fold the left corner of the triangle up to the top corner and then fold the right corner up to the top corner to create a diamond shape.

Step 7: Fold the bottom corner of the diamond up to the top corner to create a smaller diamond shape.

Step 8: Repeat steps 4-7 with the remaining burlap squares.

Step 9: Stack the burlap diamonds on top of each other, alternating the direction of the petals.

Step 10: Use a needle and thread to sew the center of the burlap flowers together.

Step 11: Cut a piece of ribbon and tie it around the center of the burlap flowers to create a bow.

Step 12: Attach a piece of wire to the back of the burlap flowers to create a hanger.

Step 13: Hang the burlap flower door hanger on your front door or anywhere else you'd like to add a touch of rustic charm.

Materials needed for burlap flower door hanger:

- Burlap fabric

- Scissors

- Needle and thread

- Ribbon

- Wire

Burlap flower door hangers are a popular DIY project that can add a touch of rustic charm to any home. While the basic steps for making a burlap flower door hanger remain the same, there are many variations and embellishments that can be added to make each one unique. Some people like to add additional layers of petals to create a fuller flower, while others like to add buttons or other decorations to the center of the flower. Additionally, different types of ribbon and wire can be used to create different looks and styles. Overall, making a burlap flower door hanger is a fun and easy project that can be customized to fit any decor style.

2、 Steps to create burlap flowers

How to make burlap flower door hanger:

Burlap flower door hangers are a great way to add a rustic touch to your home decor. Here are the steps to create one:

1. Cut a piece of burlap into a rectangle shape. The size of the rectangle will depend on how big you want your flower to be.

2. Fold the burlap in half lengthwise and then in half again widthwise. Cut the burlap along the folded edges to create four equal squares.

3. Take one of the burlap squares and fold it in half diagonally to create a triangle. Fold the triangle in half again to create a smaller triangle.

4. Cut the tip of the triangle off to create a small hole in the center of the burlap.

5. Unfold the burlap and you should have a flower shape. Repeat steps 3-5 with the remaining burlap squares.

6. Layer the burlap flowers on top of each other, starting with the largest flower on the bottom and the smallest flower on top.

7. Use a needle and thread to sew the flowers together in the center.

8. Cut a piece of ribbon and tie it around the center of the flowers to cover the thread.

9. Attach a piece of twine or ribbon to the back of the flowers to create a hanger.

10. Hang your burlap flower door hanger on your front door or anywhere in your home for a charming touch of rustic decor.

In recent years, burlap flower door hangers have become increasingly popular due to their versatility and rustic charm. They can be customized with different colors and patterns of burlap, as well as embellishments such as buttons or beads. Additionally, they can be used for various occasions such as weddings, holidays, or everyday home decor.

3、 Assembling the door hanger base

How to make burlap flower door hanger:

1. Assembling the door hanger base: Start by cutting a piece of burlap ribbon to the desired length for your door hanger. Fold the ribbon in half and glue the two ends together to create a loop. Cut a piece of wire and bend it into a hook shape. Insert the wire hook into the loop of the burlap ribbon and twist the ends together to secure it in place.

2. Creating the burlap flowers: Cut several strips of burlap ribbon to the desired length for your flowers. Fold each strip in half lengthwise and then fold it in half again. Cut the folded burlap into a petal shape, making sure to leave the bottom of the petal intact. Repeat this process with several strips of burlap ribbon.

3. Assembling the flowers: Take one of the burlap petals and fold it in half lengthwise. Apply a small amount of hot glue to the bottom of the petal and press it onto the wire loop of the door hanger base. Repeat this process with the remaining burlap petals, layering them on top of each other to create a flower shape. Once all of the petals are attached, cut a small circle of burlap and glue it to the center of the flower.

4. Adding embellishments: To add some extra flair to your burlap flower door hanger, consider adding some embellishments. You could attach a small wooden sign with a message, tie a ribbon bow to the wire loop, or glue on some faux leaves or berries.

Overall, making a burlap flower door hanger is a fun and easy DIY project that can add a touch of rustic charm to your home decor. With just a few simple materials and some creativity, you can create a beautiful and unique door hanger that will impress your guests and brighten up your front door.

4、 Attaching burlap flowers to the base

How to make burlap flower door hanger:

Burlap flower door hangers are a great way to add a rustic touch to your home decor. Here are the steps to make one:

1. Gather your materials: You will need burlap fabric, a wire wreath frame, floral wire, scissors, and hot glue.

2. Cut the burlap: Cut the burlap into strips that are about 2 inches wide and 12 inches long.

3. Make the flowers: Fold the burlap strip in half lengthwise and then in half again. Cut the folded burlap into a petal shape. Unfold the burlap and you should have four petals. Repeat this process until you have enough petals to make several flowers.

4. Attach the petals: Take one petal and fold it in half lengthwise. Use floral wire to wrap around the bottom of the petal to secure it. Repeat this process with the remaining petals, stacking them on top of each other and securing them with floral wire.

5. Add the center: Cut a small piece of burlap and roll it up tightly. Use hot glue to secure it in the center of the flower.

6. Attach the flowers to the base: Use floral wire to attach the flowers to the wire wreath frame. You can arrange them in a pattern or randomly.

7. Add finishing touches: You can add additional embellishments such as ribbon or greenery to complete the look.

Attaching burlap flowers to the base:

To attach the burlap flowers to the base, use floral wire to wrap around the bottom of the flower and then attach it to the wire wreath frame. Make sure to secure it tightly so that it doesn't come loose. You can also use hot glue to attach the flowers to the base, but be careful not to use too much as it can seep through the burlap and be visible. It's important to arrange the flowers in a way that looks aesthetically pleasing and balanced. You can experiment with different patterns and colors to create a unique and personalized burlap flower door hanger.